High-efficiency Options
High-efficiency Options | HVAC Unit Replacement | Heating and Air Conditioning | Calhoun
When your energy bills keep climbing and comfort never seems to settle in, it’s time to look beyond another quick fix. HEP’s High-Efficiency Options team in Calhoun specializes in HVAC unit replacement that pairs cutting-edge equipment with meticulous installation, giving you a system built to slash utility costs while maintaining consistent temperatures year-round. Our factory-trained technicians analyze your home’s square footage, insulation, and airflow patterns, then recommend ENERGY STAR® models that can deliver up to 30% greater efficiency than aging units.
From the first call to the final walkthrough, you’ll notice the HEP difference: straightforward pricing, fast scheduling, and a spotless jobsite when we’re done. We even handle rebates and financing so you can start enjoying lower bills and cleaner indoor air without delay. Upgrade today and discover why so many Calhoun homeowners trust HEP to keep their families comfortable—season after season.
FAQs
What makes an HVAC system “high-efficiency” in Calhoun, and how much can I expect to save?
A high-efficiency air conditioner or heat pump is one that meets or exceeds the new SEER2 (Seasonal Energy Efficiency Ratio) and HSPF2 (Heating Seasonal Performance Factor) standards that went into effect in 2023. In Georgia, a unit rated 15.2 SEER2 or higher and 8.1 HSPF2 or higher is considered high-efficiency. Because summers in Calhoun are long and humid, upgrading from a 10–12-year-old 10 SEER system to a 16 SEER2 unit can cut cooling costs by 30–40 %. In winter, a high-efficiency heat pump can reduce electric heating bills by up to 50 % compared with electric strip heat or an older heat pump.
How can I tell whether I should replace my existing HVAC unit instead of repairing it?
Most systems last 12–15 years in northwest Georgia’s climate. Replacement is usually the better investment when: • The unit is over 10 years old and needs a major component such as a compressor or heat exchanger. • Repairs would exceed 30 % of the cost of a new, high-efficiency system. • Your energy bills have crept up while comfort and humidity control have declined. • R-22 refrigerant is still used (it is no longer manufactured, so future repairs will be costly). • Hot/cold spots persist even after routine service. A modern variable-speed system can solve these issues while slashing energy use.
Are there rebates or tax credits available in Calhoun for installing a high-efficiency HVAC system?
Yes. Homeowners in Gordon County can stack several incentives: • Federal 25C tax credit: Up to 30 % of project cost, capped at $600 for a qualified air conditioner and $2,000 for a qualified heat pump (through 2032). • Georgia Power Home Energy Improvement Program: Rebates of $50–$250 per ton for heat pumps that meet specific SEER2 and HSPF2 levels. • TVA EnergyRight rebates (for NGEMC customers): $150–$400 per ton on qualifying systems. • Local utility financing: Many Calhoun-area electric co-ops offer on-bill financing at low interest rates. We complete and submit all paperwork so you receive every dollar you’re entitled to.
How long will an HVAC replacement take, and will I be without heating or cooling?
A straightforward change-out of an outdoor condensing unit and matching indoor coil or air handler typically takes one full workday (6–8 hours). If new ductwork, line sets, or electrical upgrades are needed, the project may extend to two days. We schedule replacements during mild weather when possible, bring portable heaters or spot coolers if extreme temperatures are expected, and restore service before we leave each day so you’re never without comfort overnight.
What size HVAC unit do I need for my home in Calhoun’s climate?
Rule-of-thumb sizing (e.g., “one ton per 600 sq ft”) often leads to oversized equipment, higher humidity, and lost efficiency. We perform a Manual J load calculation that accounts for Calhoun’s summer design temperature of 94 °F, winter design temperature of 24 °F, your home’s insulation, window area, orientation, and air leakage. The result is an exact BTU requirement, usually between 1.5 and 5 tons for most single-family homes. Proper sizing ensures the system runs long enough to dehumidify in summer and avoids short-cycling that wastes energy.
What maintenance is required to keep my new high-efficiency system operating at peak performance?
1. Change or wash filters every 30–90 days depending on type and household conditions. 2. Schedule professional tune-ups twice a year—cooling service in spring and heating service in fall. We clean coils, verify refrigerant charge, test safety controls, and update firmware on smart thermostats. 3. Keep the outdoor unit clear of leaves and debris for at least 18 inches on all sides. 4. Use a programmable or Wi-Fi thermostat to avoid extreme set-backs that force the system to run at full capacity when you return. 5. Consider enrolling in our Comfort Club: members receive priority service, a lifetime parts warranty on covered repairs, and documented maintenance that protects manufacturer warranties (most require annual proof).